Available from Nitrotek this is their highest top of the range model for anyone contemplating serious racing. Should your hobby already be concerned with nitro cars then this is a great opportunity to take yourself up to the next rung of the ladder. Take a look at the Specifications and the Features listed below and compare them to other cars being marketed and you will understand why Nitrotek consider this model to be supreme.
It contains amongst other things a very large GO .28 engine, polished aluminium pipe and 3 piece racing clutch. The manufacturers have thought very carefully about this car and made every part so as to produce maximum performance.
Being a 1/8 scale model it is far chunkier than for example a 1/10 scale model. This is not really the best item to purchase if you are a novice in the world of radio controlled cars HOWEVER if you are ready for the next step upwards then look no further than this VRX-1 from Nitrotek.
The VRX-1 has radio equipment included with it and it comes fully built. You will simply need AA batteries, a glow start and fuel.
Specifications:-
Height: 190mm
Width: 305mm
Track: 261mm
Length: 490mm
Wheel base: 325mm
Weight: 3.3Kgs
Engine: SH 28 Size
Wheel diameter.: 115×42MM
Ground clearance (F/R): 30MM
Gear ratio: 11.71:1
Weight: 3.3Kgs
Chassis: 3.2mm-thick hard anodized alum.
Drive: Four wheel shaft drive
Wheels: Dish wheels with 17mm hex
Shocks: Four oil filled aluminium shocks
Transmission: Single speed
Ball Bearings: Full set
Universals: Front CVDs
Shock towers: 3.2mm thick hard anodized aluminum
Main Gear: 49 tooth, steel construction
Clutch Bell: 11 tooth, steel construction
Gearboxes: Sealed front, centre and rear
Shocks: Four oil filled aluminium shocks
Differentials: Bevel gear type with oils
Fuel Tank: 125cc
Air Filter: High flow 2-stage
Clutch shoes: 3 shoe
Engine: GO 28 w/rear exhaust and alum. Tune pipe
Engine Mounts: Adjustable cooled hard anodized alum.
Brakes: Four brake system
Tires: square pins with foam inserts
Camber: Adjustable
Caster: Adjustable
(cont’d on Page 2)
Features:-
1/8 Scale nitro powered truggy
Solid steel gears and differentials
Massive rear exhaust 28 size GO engine
Solid 6061/T6 anodized solid aluminium chassis
Metal central gearbox
4 Brake system gives ultimate stopping power
Lightweight engine flywheel & solid universal joint cups
Sealed box & switch for protecting receiver system
3 piece racing clutch
Highly adjustable for different racing conditions
9Kg High torque steering servo
Leak proof fuel tank with long overflow pipe
Polished aluminium manifold and pipe fitted as standard
Three differentials
Chrome universal joint and ball head bearings
High quality wheel rims and tyres
High quality 27MHZ CE approved Radio system with changeable freq crystals